Front

The Shimano Tourney TX800 front derailleur offers precise shifting with HYPERDRIVE technology for 3x8 speed drivetrains. - Action: TOP SWING - Angled clamp band design - Applicable Top-Mid tooth difference: 10T - Chain line: 47.5/50mm - Chain stay angle: 66-69 - Top gear teeth: 42T/48T - Total capacity: 20T

The Rival eTap AXS wide front derailleur is optimized for smaller X-Range chainrings on wide cranks and uses Yaw technology so there's no need for trim. Its wider position on the bike also provides clearance for extra wide tires, so you can venture far beyond the beaten path. - Wireless electronic eTap shift logic for intuitive shifting, easy setup, and reliability - For wide cranksets with 43/30T chainrings - Additional clearance for 700x45c and 27.5x2.1" tires - Crisp and accurate front shifts - AXS enabled for easy personalization - Battery Not Included

Designed for 2x9 speed drivetrains, the Shimano Altus front derailleur is HYPERDRIVE compatible. - Consistent off-road front shifting - One spec for 48.8mm & 51.8mm chainlines - Improved tire clearance - Precise and reliable shifting - Greater compatibility

Shimano's Deore XT Front Derailleur sports a lightweight aluminum cage that's chrome plated to reduce wear, and uses wide parallel pivots to provide fast, smooth, and reliable front shifting. This derailleur uses direct mounting and is specifically optimized for 2x10 set ups.

- Adapts braze-on front derailleurs to fit on frames without braze-on mount - Hinged clamp

- Lighter And Intuitive Shifting Operation - Natural Front Shift Lever Stroke - More Ergonomic Power Curve - New Link (Toggle) Construction - Precise & Easy Front Derailleur Set Up - More Cable Routing Options - Integrated Cable Tension Adjustment - Link (Toggle) Construction For No Need Of Tl-Fd90 And Turning Converter Assembling - Adjustable Cable Tension On The Front Derailleur - Adapted For Race Specific Frame Design - Available Wider Front Gear Pitch - Shorter Length Of Rear Center With O.L.D. 135mm - Largest Chainrings (2x): 46-55T - Chain Stay Angle: 61-66 - Chain Line: 43.5mm

Shimano XT FD-M8070 Di2 Front Derailleurs - Accurate and stable shifting in any condition - Instant response - Customized shift speed within Multi-shift - Powerful shifting - Increased power vs. mechanical - Smart and efficient gear selection with Shimano Synchro Shift - Single lever operation - Rider-programmable shift mapping - Series : Shimano Deore XT - Swing Action: Down Swing - Top Gear Teeth: 38-34T - Chain Line: 48.8 - Chain Stay Angle: 66-69 - Average Weight: 134 grams

- Model Number: FD-R3000 - Series: SORA - Top Gear Teeth: 46-52T - Chain Stay Angle: 61-66 - Chain Line: 43.5 - Models: Braze-on and band clamp available - Band clamp model includes shims for 31.8/28.6mm seat tubes

- Ergonomic Shifting Operation Without Stress - Shimano Synchronized Shift - Race Endurance For Less Damage In Crush - Quick And Smooth Front Shifting "Under" High Pedaling Torque - Maintains Compact And Smooth Appearance - Top Gear Teeth: 46-55T - Chain Stay Angle: 61-66° - Chain Line: 43.5mm

Despite its smaller, lighter design, the Shimano Dura-Ace FD-R9250 offers ultra-fast front shifting. - Fast Di2 shifting performance - Smaller, sleeker, lighter - Frontal area is smaller than previous designs to reduce aerodynamic drag - Top gear teeth capacity: 50-55t - 61-66 degree chainstay angle - Includes 1 SD300 port

R8 front derailleurs feature a cold forged aluminum body and are optimized for 7 and 8-speed chains and Shimano-compatible road shifters.

Shimano Ultegra R8000 front derailleur. - Lighter front shifting operation - Link construction matches the force curve of the hand more naturally to reduce effort at the end of shifting - 100% perfect setting - New link construction allows for more flexible cable routing design - TL-FD68 and turning converter is not required in assembly - Easy and precise setting - Now possible to adjust cable tension on FD without specialized tools - Redesigned to fit wider gear pitch without sacrificing shifting performance - Shorter length of rear center (410mm) with O.L.D. 135mm - Model Number: FD-R8000-B - Series: Ultegra - Top Gear Teeth: 46-53T - Chain Stay Angle: 61-66 - Chain Line: 43.5 - Average Weight: 106 grams

Claris R2000 series offers reliable functionality at a price point for new riders. Designed for easy rides around town with the durability to handle a long tour, Claris R2000 has a sporty design and promises the opportunity of comfortable and casual riding.

Shimano FD-M2000 front derailleurs feature Mega Lite and HyperGlide technologies for smooth and easy operation. They're a perfect replacement for your 3 x 9 drivetrain.

Shimano's Tiagra Front Derailleur (3x10-speed) is sleek, balanced and consistent. The Tiagra 4700 series provides serious entry-level riding performance with cascaded technology from the top shelf Dura Ace line. - Model Number: FD-4703 - Series: Tiagra - Cassette Compatibility: 10 - Top Gear Teeth: 50T - Maximum Capacity: 20T - Chain Stay Angle: 63-66 - Chain Line: 45 - Band Mount: 28.6mm / 31.8mm (w/AdapterS) 34.9mm

Altus wide link 7/8-speed compatible dual-pull multi-fit front derailleur for recreational off-road use. - Compact conventional swing design - Low-friction wide linkage reduces shifting effort and increases rigidity - Dual-pull design allows it to be used with top or bottom cable routing - Multi clamp band is compatible with all frame dimensions - 66-69 degree chainstay to seat tube angle range - For outer chainring size from 42 to 48 tooth, total capacity 20 teeth - Compatible with 7- or 8-speed drivetrains

The Shimano Tourney TX800 front derailleur offers precise shifting with HYPERDRIVE technology for 3x7 and 3x8 speed drivetrains. - Action: Top Swing - Applicable Top-Mid tooth difference: 10T - Cable Route Type: Dual-Pull - Chain line: 47.5/50mm - Chainstay angle: 63-66° - Top gear teeth: 42T/48T - Total capacity: 20T

Combining Shimano's Di2 platform and the road incarnation of Hyperglide+, the Ultegra FD-R8150 front derailleur shifts between chainrings with the fast and seamless action. - Small, sleek and lightweight front derailleur - Frontal area is smaller than previous designs to reduce aerodynamic drag - Top gear teeth capacity: 50-54t - 61-66 degree chainstay angle - Includes 1 SD300 port

The Shimano Deore XT FD-M8100 front derailleur offers powerful and stable front shifting for 2 x 12 systems. - Increased traction range and no chain rub for long travel bikes - Extra wide range with front double 36-26T - Compatible with 2.3-inch tire on wider rims - Drivetrain Speeds: 12 - Front Der/Shifter Compatibility: Shimano Mountain - Front Derailleur Cable Pull: Front Pull - Front Derailleur Clamp: 34.9 (1-3/8") , 31.8 (1-1/4") , 28.6 (1-1/8") - Front Derailleur Style: Side Swing - Max Ring (teeth): 38

SRAM's Rival 22 Front Derailleur delivers precision shifting with YAW technology. The steel cage with aluminum links ensures strength and durability. • Yaw cage rotates in line with chain, improving the shifting speed and precision while eliminating the need for shifter trim • Integrated chain spotter protects your frame, installs and adjusts independently of the derailleur itself • Precision alignment markings on the cage • Clamp: braze-on • Weight: 89g with Chain Spotter

Claris R2000 series offers reliable functionality at a price point for new riders. Designed for easy rides around town with the durability to handle a long tour, Claris R2000 has a sporty design and promises the opportunity of comfortable and casual riding.

Featuring full metal construction and precisely engineered linkages, Marvo level derailleurs deliver high end performance that will last.

Exceptional front shifting performance for large-wheel mountain bikes. Tackle trails with this Shimano CUES FD-U6000 front derailleur's smooth and quiet shifting. It is compatible with 2x11 and 2x10-speed drivetrains. - Smooth and quiet shifting on and off the trail - Provides and extra-wide range with front double - Offers wider tire clearance - Works with 48.8 - 51.8mm chainlines - 64-69 degree chainstay angle

FD-A073 Tourney Front Derailleur for 2x7 or 3x7 drivetrains. - SG-X chainring compatible - Quick assembly - Interchangeable with SHIMANO road 7-speed system - Easy adjusting - Light operation and smooth shifting

Centos front derailleurs are precisely manufactured for responsive, accurate shifting under race conditions. - Compatible with Shimano Tiagra 4700 10-speed road systems - Includes adapter for 31.8 and 28.6mm seat tubes

Mezzo front derailleurs offer durable construction and seamless compatibility with existing systems, making repairs and upgrades easy. - Aluminum bracket, plastic body - Includes 31.8mm clamp adapter

- 7/8 speed design - Steel inner and outer links with steel chain cage - Multi-clamp to fit 28.6 – 34.9mm frames - Multi-pull design - Total gear teeth: 48

- Model Number: FD-R3030 - Series: SORA - Top Gear Teeth: 50T - Chain Stay Angle: 63-66 - Chain Line: 45 - Models: Braze-on and band clamp available - Band clamp model includes shims for 31.8/28.6mm seat tubes

Sleek, balanced and consistent. Shimano's Tiagra 4700 series front derailleur provides serious entry-level riding performance with trickle-down technology from the top shelf Dura Ace line. - Model Number: FD-4700 - Series: Tiagra - Cassette Compatibility: 10-speed - Top Gear Teeth: 53T - Maximum Capacity: 16T - Chain Stay Angle: 61-66 - Chain Line: 43.5 - Band Mount: 28.6 / 31.8 (w/AdapterS) 34.9

The Shimano GRX RX400 front derailleur offers lighter front shifting operation and easier setup thanks to the new link construction and integrated cable tensioner. It features a 2.5mm outboard chain line design to allow wider tire clearance for mixed-terrain riding. - Ergonomic power curve - Integrated cable tension adjustment - Natural stroke feeling - Chainline +2.5 mm vs. conventional road FD - Compatible with up to 42 mm tires - More cable routing options - Lighter front shifting - Wider tire clearance - Precise and easy front derailleur adjustment