Alpine Touring Ski Bindings
The innovative Kingpin has earned its stripes as the performance standard in PinTech AT binding technology. The Kingpin's unique toe and heel pieces offer a unique blend of characteristics that seek to optimize both climbing and descending. The toe piece is updated with the dual spring and higher pivot point setup from the Alpinist. Ease of use, and best of all, unbeatable power transmission while on the descent mean that you've never had a day in the backcountry like the ones you'll have on the Kingpin! CLIMBING AIDS KINGPIN - The climbing aid offers two positions with 7° and 13° which can easily be accessed with the ski pole, even in an unstable standing position. Integrated elastomer paddings dampen the impact reducing the irritating traditional “clack” and allow more comfortable hiking. XXL POWER TRANSMITTER - Extra large power transmitters in the heel with reduced weight for minimum friction and maximum centering for the lateral movement of the heel. KINGPIN HEEL - The revolutionary heel construction for the Pin Technology bindings features wide sole contact points to deliver the kind of direct, lossless power transfer more frequently seen in alpine bindings. The KingPin heel is also many times safer than traditional Pin Technology bindings. CARBON REINFORCED PIN TOE & ANTI ICE PADS - Carbon fiber reinforced material for improved stiffness and super lightweight. Anti Ice Pads in the base of the toe to prevent icing in critical areas. VERTICAL & LATERAL ADJUSTABLE RELEASE FUNCTION - Vertical and lateral individually adjustable release in the heel for improved release functionality. CRAMPON KINGPIN/ALPINIST - Easy to install crampons for KINGPIN and Alpinist available in the sizes 80mm, 90mm, 105mm, 120mm.
Absolutely uncompromising. You will be able to rip the downhill just like you do in a resort, with the uphill efficiency of a pin binding while having the solid downhill insurance of an alpine binding. Downhill performance - The S/LAB SHIFT MNC 10 is the ultimate downhill and uphill tool for skiers looking to conquer the entire mountain. Touring capability - PIN toe design enable full heel rotation for efficient touring and kick turning while the convenient step-in switch between ski and tour modes to access to untracked lines. Lightweight - Made with a revolutionary new material, Carbon-infused PA, the S/LAB SHIFT MNC 10 is light yet strong weighing in at 1.750kg / pair. - +Elastic travel The ultimate elastic travel on the wings. It holds the boot back when faced with bigger shocks and minimizes the risk of pre-release. - MNC (Multi Norm Certified) The certification guaranteeing equal performance and safety level no matter the boot norm. TUV - Binding tested and certified by the TUV safety monitoring agency, the reference entity for safety certification. XL Wings - Long wings that envelop the tip of the boot perfectly in order to provide increased power transmission and confidence in freeride bindings. Easy climbing aids manipulation - Ensures easy switch with the poles between climbing aid positions. Crampon system - Possibility to attach dedicated crampons to the binding. Aluminum - A rigid and strong construction that allows enhanced power transmission. Carbon-infused PA - A very lightweight and resistant alloy developed specifically for the needs of the Shift binding construction.
The ultra-light pin binding (245 g w/o brake) offers active length compensation during ski flex and an impressive power transfer downhill due to a 38 mm drill pattern. The carbon-reinforced toe provides great stiffness and comes with anti-ice pads and integrated elastomers for easy stepping in. The heel features a climbing aid with 0°, 5°, and 9° angle and allows super convenient switching between hike and ride mode. PERFECT STEP-IN - Integrated elastomers serve as a visual aid and allow easy stepping in. - Anti-ice pads prevent icing of toe and heel - Length adjustment up to 15 mm (+/- 7,5 mm) PERFECT HIKING UPHILL - Only 245 g due to ultra-light construction - Easy to use climbing aid (0° / 5° / 9°) - 0° walking mode for long, slightly elevated ascents - Fast shift mode for super fast angle changes of the climbing aid - Easy mounting of the crampon, available in 4 widths PERFECT DOWNHILL RUN - Perfect power transfer thanks to a 38 mm drill pattern - Maximum stiffness due to carbon-reinforced toe components - Length compensation of the ski flex - Adjustable horizontal release with DIN-settings 4 - 9 or 6 - 12 - Fast and simple switching between hike and ride mode - Brake width: 110mm - Length adjustment: 265 – 325mm (Short), 305 – 365mm (Long)
Marker's F10 Tour is an ideal entry level touring binding that can offer years of great performance. Focusing on producing the right binding for the end user is Marker's DNA. For the skier who wants a very light all-day touring setup with solid all-mountain performance, the Tour 10 features a DIN range of 3-10, making it a great choice for lighter weight skiers. Compatible to all kinds of alpine and touring boots, thanks to Sole.ID! The Climbing Aid works with 0°, 7° and 13° for relaxed uphill climbing in any angle. SOLE.ID - One binding, two boot norms - Whatever boot you wear, all Marker SOLE.ID bindings are compatible to every kind of ski boot! Whether you prefer alpine boots or boots with touring sole, with SOLE.ID the bindings can be adjusted in seconds. The secret is the height-adjustable gliding plate; easy to handle and of course providing uncompromising performance. SOLE.ID respects ISO 5355 (alpine boots) and ISO 9523 (boots with touring soles). HOLLOW TECH - Our fibre-reinforced frame base plate provides impressive riding stability and is yet very light due to the gas injected hollow construction. BACKCOUNTRY COMFORT - The patented, ergonomically shaped lever under the boot allows comfortable opening and closing. The position prevents the binding from unwanted release and provides unparalleled security against an undesired "telemark" situation. AFD STAINLESS STEEL - All MARKER bindings are equipped with a moveable AFD (anti friction device) leading to a highly precise release almost entirely unhindered by dirt, snow and ice! Individual adjustment of the AFD to the area of application ensures perfect functionality - from racing, for children's bindings or on ski tours. CLIMBING AID - The titanium climbing aid offers two positions with 7° and 13° which can easily be accessed with the ski pole, even in an unstable standing position. Integrated elastomer paddings dampen the impact reducing the irritating traditional "clack" and allow more comfortable hiking. - Brake width: 90mm - Length adjustment: 265 – 325mm (Short), 305 - 365mm (Long)
Page 1 of 1