Forks

Whisky poured over every detail, pushed the limits and broke new ground during the creation of the No.9 Rigid Carbon Mountain Bike Fork. It eliminates uncomfortable chatter and vibration over rough sections for an astoundingly plush ride. The delightfully stiff and compliant UD carbon fiber construction, tapered steerer, and 15mm thru-axle ensure minimal weight and precise handling. It all results in an enhanced riding experience and adds up to performance that you can count on. - Custom DT RWS Skewer included - 3.0" max recommended tire size - Axle to Crown Length: 480mm - Brake Mount: IS Disc Brake 160mm - Crown Race: 40 - Defined Color: Black - Front Axle: 15 x 100mm - Offset: 51mm - S.H.I.S. Stem Clamp Diameter: 28.6 - Steerer Type: Tapered - Weight: 750 grams - Wheel Size: 29-inch

For carving XC courses, going the distance on gravel roads, or roaming along bikepacking routes, the Whisky No.9 MTN Boost Fork brings a new dimension to your mountain bike. Lighter and stiffer than a suspension fork, it’s long enough to replace forks with 120mm to 130mm of travel. The boost 110mm spacing means your current wheels will likely bolt right in, and clearance for up to a 29 x 3.0" or 27.5 x 3.0" tire lets you alter your setup for wherever you’re riding. The Three-Pack mounts handily hold extra water, camping gear, tools, tubes, and more. - 15mm thru-axle with 110mm Boost spacing - Post-style brake mount - 1.5" tapered carbon steerer - Two sets of Three-Pack mounts - ASTM Condition 3 - For rough off-road riding and jumps less than 24"

ENVE's Road Fork is the fork by which all others are judged, built for road cyclists looking for the optimal balance of weight, strength, and stiffness. When everyone was turning away from the fork aftermarket, we focused our efforts on creating the best aftermarket fork we could. By following our mantra of functional simplicity, we developed a manufacturing process that allows the fibers in an ENVE fork to run continuously from the top of the steerer to the bottom of the drop-outs. The ENVE forks feature a hollow one-piece design free of bonding or drilling, and the brake bolt hole is molded into the crown, allowing for additional weight savings and strength. You can literally put an ENVE fork on a bike within minutes of it leaving the mold. While this manner of construction is novel, the real win is that the majority of artisan frame builders and customers choose ENVE as their fork of choice due to its confident on-road performance and handling characteristics.

The No.9 CX Flat Mount fork is a light-weight, forward-compatible front-end upgrade, ideal for cyclocross, gravel, or commuting. Featuring the flat mount disc brake standard, easy fender mounts and 12mm thru-axle dropouts to create a refined, clean design that trims considerable weight over previous versions. The fork provides big tire clearance, precise handling and tracking capabilities, and a comfortable ride quality that Whisky forks are known for. - 12mm thru-axle, 100mm spacing - Designed for flat mount disc brakes - Hidden, removable fender mounts - 42mm max recommended tire size - ASTM Condition 2 - For off-road riding and jumps less than 12-inches - Includes thru-axle and Whisky Parts Co. compression plug

Keep the weight down and your headset snug with the Specialzied Carbon Steerer Tube Plug.

With bigger bikes there comes bigger demands. Thankfully, we created the 35 Gold to meet all of them, both in performance and value. Whether you have an E-MTB or MTB, the burly 35 Gold checks the box with our proven DebonAir spring and Motion Control damping. And new this year is an E-MTB-focused option with mounting points for optional full or short fenders. All told, you might wonder how we packed so much quality and performance into such a wallet-friendly package. Features - New E-MTB endorsement options with fender mounts are appropriate for all E-bikes (1.8" taper available) - New graphics are easy to read and make a fresh impact - Motion Control damping featuring low-speed compression adjustment to lockout - Highly tunable DebonAir spring offers a consistent feel throughout the travel - Fits Tires up to 2.8" (without fenders; the use of a full fender will reduce tire clearance) - Fast Black finished 35mm aluminum upper tubes couple stiffness and lightweight with a premium look - Offset: 44mm

Darkwave fork comes with the 28mm offset our team loves and backed by an unmatched and legendary 41-Thermal lifetime warranty against bending and breaking. - Legendary lifetime replacement warranty – laboratory tested and team proven - Custom, seamless, tapered, butted and specially formed leg tube shaping for improved grind and guard clearance - Steerer tube design improves fatigue strength and includes a built-in, integrated, lower headset seat race - Slightly longer steerer tube length for use with taller head tubes and Gyro installations - Rust-proofed with with a lightweight coating that provides the best anti-corrosion processing that's offered today - Optimized, 4mm thick dropout shape for grind and peg clearance - 7075-T6 pre-load bolt with 6 and 8mm hex key slots - 41 Thermal Processed: Sunday is the only company to use Odyssey's proven and trusted 41 Thermal heat treating. This formula has been refined and improved since the late 90's. The proven 41 Thermal process allows our products to be lightweight AND strong. It is also backed by a legendary lifetime warranty.

Ready For Rowdy The little brother to the Onyx DC, this is the Onyx SC D1. At 180mm of travel, this is our top-of-the-line enduro race fork. Featuring the proven D1 damper, high/low-speed compression, rebound, and externally adjustable OTT. With 36mm stanchions and our stiffest chassis yet, charge hard into the roughest sections with confidence. Six clicks of low-speed compression give quick access to firming up the fork for pedaling, opening up for descending, and mid settings for everything in between. Over thirty clicks of High-Speed Compression give precise control for support on big hits. Shim stack controlled rebound that is 100% dynamic. meaning, the rebound is controlled based on the speed at which oil flows through the system. The fork will react to what you throw at it and be ready for what's next. Our industry-exclusive OTT feature really sets DVO products apart from anything else. It allows you to perfectly fine-tune how the initial stroke feels without any mid/end stroke compromise. You really do the best of both worlds. Combining the stiff chassis characteristics with our exclusive features and damping design gives our forks a unique ride feel unlike anything else on the market. - D1 Damper - Compression Bladder - OTT Off the Top Adjuster - Shim Stack Controlled Damping

The Cane Creek Helm MKII Air Suspension Fork features an upgraded damper design for increased support and control and a redesigned air spring that allows for increased air volume for better traction and suppleness. - D-Loc 15mm bolt-on thru-axle

Service your suspension fork with Enduro Seal KIts. - Custom made for each make and model of fork

THE HARD CHARGING DO IT ALL TRAIL FORK Smoother, lighter, more tunable, and more capable than ever before; when it comes to a do-it-all trail fork the 34 is in a class of its own. - LOWER LEG BYPASS CHANNELS As a fork compresses, the air volume within the lower legs decreases, increasing air pressure. The more the fork compresses, the more pressure increases. This effect can have the unintended consequence of preventing full travel from being achieved. Our lower leg channels help alleviate this issue by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping. - LOWER LEG ARCH Stiffness-to-weight is the ultimate metric for bicycle design. Engineers invest countless hours poring over every ounce of material in an effort to optimize this critical ratio. The all-new 34 pulls out all the stops, shaving every possible gram while making sure not to compromise the stiffness or strength requirements of modern trail riding. - GRIP2 Our GRIP2 damper is the benchmark for unparalleled ride quality and ultra-precise adjustability. GRIP2 includes our patented Variable Valve Control (VVC) technology which allows for external fine-tuning of suspension performance. GRIP2 achieves with the twist of a knob what typically requires the time consuming and complicated task of completely disassembling and reassembling the fork. -FLOAT EVOL Returning with the same legendary suppleness and longevity, the EVOL air spring in 34’s now has an enlarged negative air spring to assist with mid-stroke support. - Performance-Elite series with black anodized stanchions - Step Cast (SC) legs with narrow stance and stepped design to saves weight, decrease frontal area, and provide clearance for the spokes and brake rotor - FIT4 damper with 3-position damper control - 160mm to 203mm rotor compatible post mount - Lightweight Kabolt thru-axle - Tapered threadless steerer

Service kits include dust seals, foam rings, oil seals, air and damper o-rings needed for basic service.

An entry level fork with the latest features and performance; Judy Silver is built around a brand new chassis derived from the Pike, works with Plus tires up to 2.8 in both the 27.5" and 29" models. Judy Silver features the Motion Control RL damper and is compatible with OneLoc remotes and has Fast Black upper tubes for an all-black look and low friction performance. - 80-120mm travel - External rebound - TurnKey lockout controls - Fast Black upper tubes - Motion Control RL damper - Compatible with OneLoc remote - Solo Air spring

The Circus project started as a way to get our slopestyle riders into competition, but it wound up becoming an industry-leading dirt jump fork for riders all over the world. Circus has set the benchmark for everyday riders' jump session requirements and delivered podium results at pro-level competitions for almost a decade. - 80/100mm or 120/130mm Internally Adjustable Travel - Air Spring - ABS+ Compression Damping w/ Jump Stack - Adjustable TPC Rebound Damping - Wheel Size: 26" - 130mm travel models can be reduced to 120mm and 100mm models can be reduced to 80mm travel using included spacers - 20mm hex axle provides superior torsional stiffness - Absolute+ cartridge platform oil damping system: specifically tuned for Dirt Jumping - Forged I-beam style crown: bigger, stronger, and more durable - Alloy steerer, and 32mm aluminum stanchions

Premium performance at down-to-earth prices. Judy now includes all of the 30mm MTB and E-MTB forks, with axle and steerer options to match any spec. Gold level gives you aluminum upper tubes and Motion Control damping. Features - New graphics package with E-MTB endorsement option (15x110mm) - Motion Control damping featuring low-speed compression adjustment to lockout - Fits Tires up to 2.8" - Fast Black finished 30mm aluminum upper tubes couple stiffness and lightweight with a premium look - Highly tunable Solo Air spring

Mastodon is a real-world trail suspension for fat bikes. This fat bike fork delivers all-temperature performance, working equally well in winter or summer, soaking up chatter and big hits. Extended ride height versions fit up to 26×5.15” / 27.5×4.5” tires. Standard ride height versions fit up to 26×4” / 27.5×3.8” tires on the snow, or taking on shimmering hot sand like a pro. All-temperature performance is born of frigid winter ride-testing. 34mm trail chassis is stiffer and steers more precisely than any other fat bike suspension fork. - 100mm (Adjustable down to 80mm) or 120mm (Adjustable up to 140mm) Travel - Expert Air Spring - Absolute+ Compression Damping - TPC Rebound Damping - Standard platform accommodates 26" tires up to 4" wide and 27.5" tires up to 3.8" wide and is optimized for frames that are designed around shorter ride heights - Flawless performance down to 0 degrees Fahrenheit (-15 deg C) - VTT compression damper offers three positions: open, firm, and locked out - 15x150mm tooled Hexlock axle - 34mm aluminum stanchions provide stiffness and stability

More than 20 years ago, BoXXer changed the DH world when it hit the scene. Featuring Charger 2.1 damper for unrivaled control between the tape. Ultra-low friction SKF wiper seals and race-proven Maxima Plush damping fluid all work overtime to reduce friction, noise, and provide lasting fork performance all the way to the finish corral. - Completely re-designed to reduce hand fatigue and fight unwanted friction, the Charger 2.1 damper increases confidence and control over every trail - Charger 2.1 RC2 damper featuring independent high- and low-speed compression adjust - Highly tunable DH-specific DebonAir spring offers a coil-like consistent feel throughout the travel - Ultra-low friction SKF wiper seals provide long-lasting fork performance and improve overall suspension feel - Maxima Plush damping fluid reduces friction and silences damper noise - Ultimate foil graphics package

Competition drives innovation, and as cross-country athletes and course designers push the boundaries of lightweight components, 32 Step-Cast Factory rises to meet the demand. A redesigned crown for 2020 increases stiffness to the same level as the trail-proven 34. The distinct shape of the Step-Cast chassis uses a narrow stance to save weight and the step design makes room for the spokes and brake rotor. - Genuine Kashima Coating on upper tubes - 32 mm upper tubes and ample bushing overlap for a quality ride - Hollowed out lower legs provide even more weight savings - FIT4 damper and FLOAT air spring

Premium performance at down-to-earth prices. Judy now includes all of the 30mm MTB and E-MTB forks, with axle and steerer options to match any spec. Gold level gives you aluminum upper tubes and Motion Control damping. Features - New graphics package with E-MTB endorsement option (15x110mm) - Motion Control damping featuring low-speed compression adjustment to lockout - Fits Tires up to 2.8" - Fast Black finished 30mm aluminum upper tubes couple stiffness and lightweight with a premium look - Highly tunable Solo Air spring

- 38mm chassis for increased stiffness and rider confidence - ButterCups block 20% of high frequency "trail chatter". Limiting these vibrations massively reduces hand and arm fatigue leaving you feeling fresh with more control. - Charger 3 features a completely new Internal Floating Piston (IFP) design with better fidelity, performance and truly independent adjustments without any "cross talk". - DebonAir+ is built to strike the perfect balance of what riders really want: butter-like small bump feel, increased air volume, and higher overall ride height. - Ultimate Bushing Package maximizes the fork's bushing overlap, reducing friction and creating the smoothest ride possible - Pressure Relief Valves eliminate unwanted air pressure build up in the lower leg caused by variations in altitude or temperature - Includes premium short fender

The MCX TA is a monster cross/gravel carbon fork with clearance to fit 29 x 2.0" tires and 27.5" x 2.1" tires. Extra long 350mm steerers fit most 62+cm frames NOTE: Newer stock will come with a thru-axle bolt instead of a thru-axle with QR cam lever (The MCX also comes in a configuration for standard QR hubs. There is an MCX Max model that is burlier with a tapered steerer, thru-axle, and even more tire clearance) – Axle to crown: 406mm – Rake: 50mm – 15mm x 100 thru-axle – Brake mount: Flat mount disc – 3-pack mount accessory bosses (3kg capacity per leg) – Single set of fender eyelets – Steerer: Aluminum, 1-1/8" x 350mm – Weight: 870g (Including thru-axle and uncut steerer) – Matte Black and limited edition Moss Green to match the Soma Wolverine B-Type frame

The 34 Step-Cast Factory is the choice for riders who want an all-round fork that performs in a vast range of applications: lightweight for climbs and highly capable for demanding terrain with enough travel to instill confidence when the trail gets rough. Weight savings are attributed to external lower casting steps, hollow lower section, and shortened shaft lengths. - Step-Cast chassis - Genuine Kashima Coating on upper tubes - FIT4 damper and FLOAT EVOL air spring - Dedicated air spring and damper tune are specific for this travel range, with a lighter tune at mid and higher velocities - Kabolt Thru Axle

Riding rigid isn’t for everyone, but for those who value functional simplicity, the updated ENVE Mountain Fork delivers. BOOST (15X110MM) - Material: Carbon - Accessory Mounts: Yes - Weight: 719g with Fender, 676g (w/ clasps) - Travel Correction: 120mm (Compatible with frames designed around 100mm-140mm Travel Forks) - Steerer Tube Length: 300mm - Rake: Adjustable – 44mm, 52mm - Axle To Crown: 490mm – 44mm Rake Position; 492mm – 52mm Rake Position - Brake: Disc - Brake Mount: Post Mount - Axle Compatibility: 15 x 110mm - Max Rotor Size: 180mm - Max Tire Clearance: 29 x 3.0” with Fender - Crown Race Diameter: 1.5” - Torque Spec: Steerer Tube: 5.5 Nm - Torque Spec: Axle: 8 Nm

All Box One forks are engineered and crafted using our Oversized Technology. These forks are the single most crucial component in the quest for bike control. We’ve moved carbon from areas of low stress to areas that handle high load. Those muscular shoulders aren’t just for looks, as they are integral to achieving superior steering stiffness. When combined with Box’s other Oversized components, you’ll experience heightened responsiveness and reduced latency. Key differences: This particular model fork is tailored for smaller racers and includes a lighter weight 1 inch 7000 series aluminum steerer tube and 10mm cold-forged dropouts. FEATURES - Overall Reduced Size for Smaller Racers - 1 Inch 7000 Series Aluminum Steerer Tube - Internal Butterfly Steerer Tube and Fork Crown Interface - 10mm Standard Dropouts - Cold-Forged and Bolded Dropouts COMPATIBILITY - Box One Stem Spacers - Box Two Stem Spacers - Box Two Threadless Headset - Box Two 1" Integrated Headset - Box Two 1" Integrated Conversion Headset - Box Two Headset Adapters - Box Two Top Load 1" Stem - Box Hex Lab 1" Stem - Box Two Center Clamp 1" Stem SPECIFICATIONS - 20 Inch - Material High Modulus Unidirectional Carbon Fiber Construction - Steerer Material 7000 Series Aluminum - Finish High Gloss Black - Offset 32mm - Steerer Tube 1 Inch - Weight 397g/14.0oz

Yari shares the stiff, hard-hitting chassis as the Lyrik and combines it with the updated DebonAir air spring and proven Motion Control damper. The Yari fork is designed to inspire confidence for those hard-hitting enduro and E-MTB riders alike. - Updated highly tunable DebonAir air spring offers a buttery smooth feel off the top and maintains a higher ride height for increased confidence in steep terrain - New graphics package for a fresh, premium look - Motion Control damping featuring low-speed compression adjustment

- 35mm chassis with a focused all-mountain mindset - satisfyingly stiff, efficient and designed to eliminate as much weight as possible. - Charger RC damper featuring Low Speed Compression adjust - DebonAir+ is built to strike the perfect balance of what riders really want: butter-like small bump feel, increased air volume to add support throughout the travel and higher overall ride height for more confidence when things get steep. - RockShox premium short fender included - Maxima Plush damping fluid reduces friction and silences damper noise

With bigger bikes come bigger demands. The new Domain takes cues from ZEB, our enduro specialist fork with serious credentials. Domain offers a new burly 38mm chassis, short fender compatibility, and a confidence-inspiring DebonAir air spring matched with a reliable Motion Control RC damper. We even brought the performance of Maxima Plush damping fluid along for the ride. Nothing goes as big as Domain does in value and performance. - 38mm chassis for increased stiffness and rider confidence - Motion Control RC damper featuring low speed compression adjust with externally adjustable dual-flow rebound - Highly tunable DebonAir air spring offers a consistent feel throughout the travel - Maxima Plush damping fluid reduces friction and quiets damper noise - Short fender compatible. RockShox premium fender sold separately. AM Variants include RockShox zip-tie fender - Fits tires up to 2.8" without fenders—use of any fender may reduce tire clearance

- 35mm chassis with a focused all-mountain mindset - satisfyingly stiff, efficient and designed to eliminate as much weight as possible. - ButterCups block 20% of high frequency "trail chatter". Limiting these vibrations massively reduces hand and arm fatigue leaving you feeling fresh with more control. - Charger 3 features a new Internal Floating Piston (IFP) design with better fidelity, performance and truly independent adjustments without any "cross talk". - DebonAir+ is built to balance butter-like small bump feel, increased air volume, and higher overall ride height - Ultimate Bushing Package maximizes the fork's bushing overlap, reducing friction and creating the smoothest ride possible - Pressure Relief Valves eliminate unwanted air pressure build up in the lower leg caused by variations in altitude or temperature. - RockShox premium short fender included

- Tange Infinity CrMo steel fork for 27.5 (650b) or 29 MTB wheels - Suspension corrected for 100mm travel 29er frames or 120-130mm 650b frames - Unicrown with straight D-shaped blades International Standard disc mount - 47mm rake - Mini Rack Mounts

- Designed to match the Pake Rum Runner Track frames - Straight legs with unicrown CrMo construction - 300mm CrMo steerer with 38mm rake

Competition drives innovation, and as cross-country athletes and course designers push the boundaries of lightweight components, 32 Step-Cast Performance rises to meet the demand. A redesigned crown for 2020 increases stiffness to the same level as the trail-proven 34. The distinct shape of the Step-Cast chassis uses a narrow stance to save weight and the step design makes room for the spokes and brake rotor. - Black anodized upper tubes - 32 mm upper tubes and ample bushing overlap for a quality ride - Hollowed out lower legs provide even more weight savings - FIT GRIP damper and FLOAT air spring - Performance Series black-on-black graphics package

Own the mountain with the award-winning 36 Factory, featuring high- and low-speed rebound adjuster, improved compression damping and reduced friction for unmatched performance and adjustability. - Genuine Kashima Coating on upper tubes - FIT damper and FLOAT EVOL air spring - Low friction seals for improved performance - Lower Leg Bleeders and Bypass Channels - Floating axles for perfect alignment - Updated Crown Design saves up to 20 grams, and offers significant structural improvements

FOX 38 Factory Series Suspension Fork is the long-travel enduro specialist. It redefines what you think a long travel single crown fork is capable of, and sets a new benchmark for confidence, performance, and durability. - The floating axle offers a distinct performance advantage due to its unique ability to match the exact width of the fork’s wheel mounting surface precisely to the front hub flange spacing, thus creating perfect chassis alignment and eliminating unwanted friction between the upper and lower fork legs - Floating axles provide much smoother suspension movement throughout the entire range of the fork’s travel, notably improving sensitivity and overall ride quality - The 38 Fork comes equipped with a quick-release lever operated patent-pending floating axle system, combining the benefit of a floating axle with the ease of a tool-free quick-release - Lower leg bypass channels alleviates air pressure by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping - Lower leg bleeders allow for atmospheric pressure equalization at the simple press of a button - The 38's lower leg arch design pulls out all the stops, shaving every possible gram while making sure not to compromise stiffness or strength requirements of modern enduro and gravity style riding

The 34 Step-Cast Factory is the choice for riders who want an all-round fork that performs in a vast range of applications: lightweight for climbs and highly capable for demanding terrain with enough travel to instill confidence when the trail gets rough. Weight savings are attributed to external lower casting steps, hollow lower section, and shortened shaft lengths. - Step-Cast chassis - Genuine Kashima Coating on upper tubes - FIT4 damper and FLOAT EVOL air spring - Dedicated air spring and damper tune are specific for this travel range, with a lighter tune at mid and higher velocities - Kabolt Thru Axle

- All Mountain/Enduro fork with 35mm stanchions - Twin-tube damper with low-pressure IFP and air spring (positive and negative air chambers), internal travel adjustment (120-160mm of travel in 5mm increments*) easily adjustable, and all parts included - ChocoLUXE Internals - ChocoLUXE is a proprietary material utilized in the damper plug, damper seal, damper IFP, and damper support. - Norglide Bushings—Norglide Bushings from Saint Gobain are metal-reinforced, self-lubricating bushings with a layer of a low friction PTFE compound. - Damper adjustments include air spring pressure, 8-position compression, ramp control (air spring ending stroke feel), and rebound - Ramp Control—'on the fly' ending stroke compression adjustment - 74mm post-mount 180mm disc brake only - Boost 15x110mm QR thru-axle - Every MRP fork is built in the MRP factory and dyno verified to ensure the highest level of quality and ensure long-term reliability - 4.2lb (1950g)

Surly's Wednesday fork is made of the same 4130 CroMoly steel as its frame counterpart. It's ready for trail use and features butted and tapered blades with thru-axle dropouts spaced at 150mm. It features many accessory barnacles (or braze-ons if you prefer to speak in "official" terms) like barrel bosses at the dropouts and crown, mid-blade thru-blade eyelets and triple bottle bosses on both fork legs. - 15mm x 150mm thru-axle - Butted and tapered blades - Barrel bosses at the dropouts and crown - Mid-blade thru-blade eyelets - Triple bottle bosses on both fork legs - Fits tires up to 5.25" wide - Axle-to-crown: 468mm - Offset: 47mm - Steerer: 260mm, 1-1/8-inch straight - Tire Clearance: 26 x 5.25-inch - Weight: 1262g

The Ice Cream Truck fork is made from 4130 CroMoly steel and is designed for Surly's Ice Cream Truck frame. It's ready for trail use and features butted and tapered blades with thru-axle dropouts spaced at 150mm. It has barrel bosses at the dropouts and crown, mid-blade thru-blade eyelets and triple bottle bosses on both fork legs. That's a lot of bosses. 51mm I.S. mounts use front disc spacing. - Axle-to-crown: 483mm - Offset: 47mm - Steerer: 260mm, 1-1/8-inch straight - Tire Clearance: 26 x 5.25-inch

This beauty here was designed alongside Surly's Midnight Special frame. In an effort to shed a few grams (it's for a road bike after all), they opted to utilize a unicrown design rather than a lugged one. In addition to the weight savings, it also looks really nice — don't you think? Like the Midnight Special frame, this fork is equipped with modern road standards like flat mount disc brakes and a 12 x 100mm thru-axle. For increased versatility, it has braze-ons for fenders and racks (including mid-blade!). - 100% CroMoly construction, fully brazed crown - Mid-blade thru-blade eyelets - Rack and fender eyelets at the dropout - 12 x 100mm thru-axle - Clearance for 27.5 x 2.32 or 700c x 42mm tires

The Long Haul Trucker fork is designed to mount racks and fenders and to haul stuff. Offered in 26? and 700c wheel sizes, the fork’s new crown provides ample clearance for 700c x 50mm tires, and sports threaded eyelets in four locations (dual dropout, midblade and fork crown) to provide more options for mounting stuff, from racks to whatever. Options galore. Curved blades, CroMoly steel. 1-1/8-inch threadless steer tube. - Axle-to-crown: 700c = 390mm - Offset: 45mm - Steerer: 700c (56–64cm frames) = 350mm - Tire Clearance: 700c x 45mm - Weight: 700c = 2.3 lb uncut

Classic 100% chromoly construction and engineered for modern accessories, that's Surly's Long Haul Trucker Disc Fork. Its beautiful curved blades are brazed to a lovely and tough investment-cast crown and dropouts. There are disc-brake mounts and eyelets for fenders and mounts for a standard or low-rider rack. Plus, it boasts a tough powdercoat finish that's tres chic. - 100% CroMoly steel construction, curved blades, powdercoated - Extensive mounting options with threaded eyelets in four locations: double eyelet dropouts, mid-blade, and a pair drilled into the fork crown - 51mm IS disc brake mount - 26" has clearance for a 2.1" tire

The No.7 road fork features full unidirectional carbon construction, available in tapered or straight steerer tubes. - Full unidirectional carbon construction - Mid-Reach Caliper rim brake compatible - 35c max recommended tire size - ASTM Condition 2 - For off-road riding and jumps less than 12" - No rider weight limit - 5 year Whisky warranty - Accommodates road plus tires - Fender mounts

The Whisky No.9 MCX “monster cross” fork brings extra-wide tires to your drop-bar bike. How wide? The MCX accommodates tires up to 700c x 51mm or 650b x 61mm (that’s 2.4-inches). A relatively short 415mm axle-to-crown minimizes the geometry effects of a larger fork, and a 51mm offset improves toe clearance with large tires or fenders. The design draws from our CX forks, with lightweight carbon construction, a 12mm thru axle, and flat-mount brakes. Three-Pack mounts, dynamo cable routing, and fender mounts (700c x 45mm tire clearance with fender) add versatility for bikepackers and gravel riders. - 12 x 100mm thru-axle - Designed for flat mount disc brakes - Hidden, removable fender mounts - 700c x 51mm or 650b x 61 mm max tire size - ASTM Condition 2 - For off-road riding and jumps less than 12-inches - Includes thru axle and Whisky Parts Co. compression plug

The Whisky No.9 RD thru-axle fork is designed from the ground up to offer a modern road fork experience. Big tire clearance, flat mount brake capability, and internal cable routing all add up to a clean look and capable performance. Featuring sleek hidden fender mounts, this fork carries through with Whisky’s promise of refined, versatile performance. - 1-1/4-inch Tapered steerer tube - 12mm thru-axle, 100mm spacing - Designed for flat mount disc brakes - Hidden, removable fender mounts - 700 x 30c max recommended tire size - Includes thru axle and Whisky Parts Co. compression plug

Whisky's No.9 RD+ is an all-road fork designed for versatility with abundant tire clearance, up to 700x38c or 650x47c. Hidden and removable fender mounts make this fork all season capable. - 12mm Thru Axle - Flat Mount Disc Brake - Tapered Steerer Tube - 700x38c/650x47c clearance

All Box One forks are engineered and crafted using our Oversized Technology. These forks are the most important component in the quest for bike control. We’ve moved carbon from areas of low stress to areas that handle high loads. Those muscular shoulders aren’t just for looks as they are integral to achieving superior steering stiffness. When combined with Box’s other Oversized components, you’ll experience heightened responsiveness and reduced latency. Key differences: This particular model fork is tailored for larger-sized racers. It also takes our application of Oversized Technology one step further as it includes a tougher 1-1/8 inch chromoly steerer tube and stiffer 20mm through-axle cold-forged dropouts. Weight Limit: 115kg (253 lbs) with limitations per Category 2 of EN 16054:2012 Standard. FEATURES - Oversized Technology™ - Chromoly Steel Steerer Tube to Accommodate Larger-Sized Racers - 20mm Through Axle to Increase Responsiveness - Internal Butterfly for Added Durability at Steerer Tube and Fork Crown Interface

One of the most successful and hard-working RockShox forks of all time capitalizes on the innovations born from SID. It features a chassis that combines classic XC performance with light trail duties, while a Motion Control damper completes the package, making Reba more capable than ever before. Features - New graphics package for a fresh, premium look - Highly tunable Solo Air spring - TwistLoc and OneLoc remote compatible

FOX 38 Performance Elite Suspension Fork is the long-travel enduro specialist. It redefines what you think a long travel single crown fork is capable of, and sets a new benchmark for confidence, performance, and durability. Performance Elite forks retain the same adjustments, features, dampers, weight, and 7000 series aluminum upper tubes as Factory Series, but have black anodized stanchions. - GRIP2 damper includes Fox's patented Variable Valve Control (VVC) technology which allows for external fine-tuning of suspension performance - Next generation FLOAT EVOL with larger negative air chamber increases small bump sensitivity - Floating axle design provide much smoother suspension movement throughout the entire range of the fork’s travel, notably improving sensitivity and overall ride quality - Lower leg bleeders allow for atmospheric pressure equalization at the simple press of a button - Equipped with a quick-release lever operated patent-pending floating axle system, combining the benefit of a floating axle with the ease of a tool-free quick-release - Lower leg bypass channels alleviates air pressure by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping

Omnium, scratch, pursuit, points, time-trial: from the inspiring Vigorelli Velodrome of Milan, the temple of international cycling and historical birthplace of the Columbus brand, the Pista Leggera is a fork that encompasses both the spiritual & performance attitudes that rode this famed track. An oversized, heat-treated, CNC-machined aluminum head provides stability and precision and is seamlessly integrated with aerodynamic, high-modulus carbon-fiber blades. The Pista Leggera has a classic 35mm rake, providing enhanced responsiveness even in narrow and fast trajectories. Pista Leggera is the pinnacle of research and development at the Columbus Carbon Lab and is adopted by many professionals for their track frames. The Pista Leggera is also available in a caliper brake version, providing you with the possibility of mounting a brake during training sessions on public routes. - T700 monocoque carbon fiber blades - 300mm tapered aluminum steerer - Clearance for up to 25c tires - 9x100mm aluminum dropouts - 35mm rake - 560g

Whether you’re racing to make it to your meeting across town or striving for a personal best down your favorite new trail, the AWL e-SUV fork will get you there on time and in style. Featuring an all-new chassis, RAIL damper, and different travel options, the AWL is equipped to forgive rock and roots as well as curbs and potholes. Includes integrated mounts for fenders, lights and accessories. - Award-winning RAIL damper delivers premium suspension performance with simple yet effective adjustability and maximum durability - Stiff 34mm e-optimized chassis meets the most stringent e-bike testing standards - Integrated fender and light mounts delivery maximum versatility - Clearance for tires up to 2.6” wide - 160-230 mm rotor compatible

Ideal if you are looking for a rigid 26" dirt jump fork that won't break the bank - CrMo steerer with oversized 31.8mm diameter plain gauge CrMo legs - 51mm International Standard disc brake mounts - 9.5mm (standard QR) safety dropouts - 1-1/8" 2-piece welded steerer/crown

For the gravity inclined, there’s simply no substitute for Bomber. This dual crown DH fork is ready for riders who push themselves and their gear to the limit. Long descents and endless laps are par for the course. Bomber 58 gives you the confidence for full send, all day, all season. Features - Huge 40mm stanchions for stiffness and steering precision - 20x110 DH (non-Boost) axle for standard DH hub spacing - Indexed GRIP damper with no-fuss adjustment for compression and rebound - Air spring for progressive stroke on the big hits - Reliable, consistent performance on any DH track or freeride line

Redesigned by the world’s fastest racers, for the world’s fastest racers, you want BoXXer in your corner. The all-new 38mm chassis is equipped with the DebonAir+ twin tube air spring that will have you thinking it’s a coil. Paired with a Charger 3 RC2 damper tuned for downhill speed, BoXXer Ultimate takes you straight to the top step of the podium. And with our new crown adjustment lines, setup is a breeze—no rulers required. FEATURES - 38mm chassis designed to meet the needs of the world’s fastest racers with balanced stiffness and ride quality - DebonAir+ twin tube air spring strikes the perfect balance between butter-smooth small bump feel, added support throughout the travel, and taller ride height for confidence when things get steep - Signature colorway BoXXer Electric Red with an all-new graphics package - RockShox premium fender compatibility (RockShox Bolt-On Fender included with purchase) - Lightweight machined and anodized crown for premium looks and durability - Crown height gradient creates a visual guide to simplify setup, no ruler required - Charger 3 damper tuned for BoXXer’s updated chassis and spring. Featuring High Speed Compression, Low Speed Compression, and a revamped Low Speed Rebound, every click is meaningful and exact. This allows the rider to tune to perfection with every click. - ButterCups block 20% of high-frequency “trail chatter” to reduce hand and arm fatigue, leaving you feeling fresh with more control - Ultra-low-friction SKF wiper seals provide long-lasting fork performance and improve overall suspension feel - Maxima Plush damping fluid reduces friction and silences damper noise - Maxima Plush Dynamic Suspension Lube reduces friction, lasts longer, and enhances suspension performance ride after ride

The ultimate aftermarket disc brake specific road cycling fork featuring 32mm of tire clearance and solid 12mm thru-axle for secure and confident handling. Building upon nearly a decade of experience making the world's best forks, ENVE's latest road disc fork features a modern 32mm of tire clearance, a low axle-to-crown height of 370mm, internal hose routing, and a lightweight one-piece form construction developed specifically to handle the demands of disc brakes, rough roads, and large volume tires. - Material: Carbon Fiber - Steerer Tube Length: 350mm - Rake: 43, 50mm - Axle to Crown: 370mm - Brake: Disc - Axle Compatibility: 12mm - Max Rotor Size: 160mm - Max Tire Clearance: 32mm - Crown Race Diameter: 1.25 - Torque Spec: Steer Tube: 5Nm - Torque Spec: Axle: 8Nm - Weight: 425g

The all-new Bomber DJ is back in the mix with a whole new bag of tricks. Sharing the same 36mm chassis as its big brother, the Z1, the DJ comes in a dedicated 26" wheel configuration. Featuring a 20x110mm axle, the DJ is designed for maximum stiffness and offers seamless compatibility with existing DJ and DH front hub spacing standard. - Dedicated 26" wheel configuration delivers shortest possible crown height for flickable front end - Legendary Bomber durability with 36mm stanchions - Buttery and easy-to-use GRIP damper - Tapered steerer tube for maximum stiffness - Adapters available for 15 x 100mm axle - 1.5 Tapered steerer - Offset: 37mm

With optimized material concentrated at the brace and seal area, outstanding stiffness and steering precision, and new E-MTB configured fork options with fender mounting points, Recon Silver is an all-around performer suited for any MTB or E-MTB bike. Features - New E-MTB endorsement options with fender mounts are appropriate for all E-bikes (15x110mm version) - New graphics are easy to read and make a fresh impact - Motion Control damping featuring low-speed compression adjustment to lockout - Fit Tires up to 2.8" (15x110mm version without fenders; the use of a full fender will reduce tire clearance) - Fast Black finished 32mm steel upper tubes couple stiffness with a premium look

Premium performance at down-to-earth prices. Judy now includes all of the 30mm MTB and E-MTB forks, with axle and steerer options to match any spec. Silver level forks give you stiff steel upper tubes and TurnKey lockout. Features - New graphics package with E-MTB endorsement option (15x110mm) - TurnKey lockout gives 'on/off' control - Fits Tires up to 2.8" (15x110mm) - Fast Black finished 30mm steel upper tubes couple stiffness and lightweight with a premium look - Plush coil spring or highly tunable Solo Air spring - Includes Right PopLoc Remote - Disc brake compatible - Offset: 51mm (29-inches) - Steerer Diameter: 1.5-inch Tapered

Not that long ago mountain bikes were simple. Suspension opened up more terrain and, more importantly, it meant more fun. The original Z2 was there for the mountain bike suspension revolution. You simply mounted it on your bike and hit the trails. Less time prepping and fixing meant you could just focus on the ride. Twenty years later, that same DNA lives on in the new Marzocchi Z2, and it's ready to shred, offering smooth and plush suspension. The new-from-the-ground-up Rail damper combines low maintenance with intuitive ease of use and impressive on-trail performance. The top-of-fork simple sweep adjuster from firm to open can lock out the fork or fully open the system with plenty of positions in between. The Z2—it just makes everything easy. - 34mm stanchions - Enhanced lower leg stiffness with "M" arch design for maximum tire clearance - 15 QRx110mm axle design - Air sprung - Rail damper - Rake: 44mm

One of the most successful and hard-working RockShox forks of all time capitalizes on the innovations born from SID. It features a chassis that combines classic XC performance with light trail duties, while a Motion Control damper completes the package, making Reba more capable than ever before. Features - New graphics package for a fresh, premium look - Highly tunable Solo Air spring - TwistLoc and OneLoc remote compatible

The Ritchey Comp Carbon Road Fork was designed for how you love to ride. Built with High Modulus Fiber (HMF), this choice road fork offers superior strength. It's strong without sacrificing a pleasurable road feel. Smooth internal fiber flow in the crown/steerer area delivers the best force transfer from crown to shaft and increased impact strength. The orientation of the fibers have been optimized to absorb and dissipate loads, which delivers a confident and comfortable ride. The fork also uses various fiber types based on their specific properties to manage different load types as best as possible in the areas in which they occur, such as side load, torsion, and impact. - Material: carbon blades / alloy steerer, crown, and dropouts - Steerer length: 300mm - Axle-crown: 368mm - Rake/Offset: 43mm - Crown diameter: 34mm (1") - 45mm (1-1/8") - Spacing: 39mm - Minimum tire clearance: 4mm - Wheel compatibility: 700c - Weight: 540g (with uncut steerer) - Color: UD carbon finish (1-1/8") - 3K carbon finish (1")

The family grows and together with the Disc and Gravel models, the Futura Cross model completes the range of disc brake solutions for off-road enthusiasts whether it be pure cyclocross, b-roads, or off-road adventures. The famous lines of the Futura fork are widened and lengthened on the Futura Cross fork to allow riders to mount larger, more tasseled tires. The Futura Cross fork can mount up to 47mm tires on 700c wheels, but more interesting is the option of mounting 27.5” wheels with a 2.1” tire; a standard tire choice that is becoming the choice of more and more gravel and monster-cross riders. Following industry standards, the fork is designed for 12mm thru-axles and flat-mount disc brakes to ensure compatibility with the majority of modern road and cyclocross disc-brake groupsets. Further increasing the range of steerer options within the Futura line, the 1.5” oversized steerer is synonymous with stability and durability, desirable traits on uneven or slippery terrain. The external cable guides are designed to make it as easy as possible to mount and maintain the fork and braking system, facilitating the cleaning and care of your fork and headset. The built-in eyelets near the dropouts give you the option of mounting a front mudguard which, when not being used, is closed with flathead screws that disappear into the lines of the fork creating a seamless and elegant continuity. Last but not least, the innovative Multi-Rake system provides frame designers with more freedom to design when it comes to geometry and trail, and an adjustable set-up based on use and choice of tires ensures riders will find the perfect fit. - T700S monocoque carbon fiber - 300mm tapered carbon steerer - Clearance for tires up to 700x47c or 27.5"x2.1" - 12x100mm thru-axle, carbon fiber dropouts with aluminum inserts - Two position axle inserts allow for either 47mm or 52mm rake - Flat mount disc brake compatible with rotors up to 180mm - Internal cable routing for a clean appearance - 450g (±10g)